Our big Spring blowout is a once a year event where we get serious about our sale. For 10 days we will have a daily deal with 50% or more off as well as almost everything in the store on sale. It ends March 22, so hurry in to the store or shop on-line today to grab your deal!
Nearly everything is on sale, but here are some of the notable bargains:
- 50%+ off daily deal. New item each day during the sale.
- Hand-Selected Atomic World Cup Skis 20% off
- Clothing 25-60% off
- Salomon Skis 30% off
- Swix Base Layer 50% off
- All Bags & Packs 25% off
- Atomic Skis and boots 30-50% off
- Salomon Pro Combi Boots 40% off
- Atomic Pro Race Skate Package $299.
- Swix HFBD 25% off
- Much More
Hurry, this sale is for 10 days only and will be over March 22. With any purchase over $50, receive a free basic heat box ($19 value) to start next season off with fast skis!
Click for the Coureur du Bois Weather Forecast.
Lots of new snow for the Steamboat race with high humidity and warmish temps. Fluorocarbons are going to be the fastest out there. Our recommendation basically follows the Swix recommendation: Start with some colder layers in the ski and work up to warmer wax with pure fluoro powder on top.
The race start has been delayed until 8:30AM, so it will be a bit warmer than originally anticipated at the start. There is a good possibility that there will be a lot of fresh snow that has fallen in relatively warm temps and that will be warming toward freezing as it falls Saturday. High humidity and fresh snow dictate high fluor waxes. We recommend hardening the bases with a layer or two of colder LF wax and then going HF and pure fluor on top. This will keep the early cold snow from getting into the base, but provide speed as the race goes on.
Swix: Harden up the bases with LF6 two layers. HF7 one layer, FC7 or FC8. My guess is that FC8 will be better in the 2nd half of the race, FC7 in the first half. If I were waxing one pair of skis, I would probably go with FC8.
Toko: Harden up the bases with LF Moly 1 layer, then LF Blue 1 Layer. HF Red mixed with a small dab of HF Blue for the final base layer. Finish with Jetstream Moly on top.
Structure: Our Z40XL, LL26 and ZR1XL should work well as will Q1.3, especially toward the end of the race. Add a 0.5 or 0.75millimeter rill to a ski that has fine structure.